Metal Jacketed Gaskets

Description

Ordering Information

Material Availability

*	Outside diameter
*	Inside diameter
*	Shape per standard index
*	Type Number
*	Thickness
*	Materials (metal or metal filler)
*	Bar size
*	Radii
*	Distance from centre line of gasket to centre line of bars

Jacket Materials
Soft Iron, Soft Steel, Stainless Steel 304, 321, 316, 410, Copper, Brass, Monel, Chrome, Aluminium, Incoloy, Titanium, Inconel, Nickel.

Soft Fillers
Non Asbestos Milboard, CAF, Rubber, Woven Asbestos, PTFE, ‘Graflex’ Exfoliated Graphite, Asbestos.

	Type 105 Double Jacketed Corrugated — soft filler Improvement on type 100. Reduced contact area, enhances compression characteristics, suitable for uneven flanges.
	Type 106 Double Jacketed Corrugated — metal filler Usually stainless outer casing with soft iron filler ring. Core material available St. St. -304.316L.321 Soft iron, Monel, Inconel
	Type 107 Single Corrugated — asbestos rope filler Typically used on very poor or pitted flanges, low bolt loading requirement.
	Type 108 Metal Jacket Laminates — soft filler Combines flexible graphite with stainless steel core material
	Type 109 and 110* Solid metal ring machined on each contact face to provide a serrated surface finish covered with Graphite. PTFE Nonas or Asbestos.

	Type 100 Double Jacketed – soft filler Similar to Type 105 used on high temperature pressure applications or where corrosion problems may exist
	Type 101 Single Jacketed – metal filler – partly enclosed Very seldom used, oild design . Used in applications where poor or pitted flanges exist on one facing.
	Type 102 Single Jacketed – Soft filler – partly enclosed Similar to Type 100, less able withstand higher pressure. Used on narrow flanges where Type 100 unsuitable
	Type 103 Single Jacketed – Soft filler – open outside edge Used in narrow flanges, protection of filler calered for by casing
	Type 104 Single Corrugated – no filler Used mainly in valve applications, small recess gap. Sometimes referred to as Taylor ring.